[Pro Version] KIWI design VR Cable Management, 6 Packs VR Pulley System fits Quest/Rift S/Valve Index/HTC Vive/Vive Pro/HP Reverb G2/PSVR/PS VR2 VR Accessories, Compatible with Quest 2 Link Cable

I had previously bought the $20 VR Cable Management from KIWI, and Im replacing them for multiple reasons, which the pro version has improvements for: The wire - steel vs dyneema: The pro version has a dyneema wire, which is stronger than steel, more flexible, cannot rust, cannot weaken from bending, cannot weaken from twisting. These are all problems that I experienced with the thin steel wire, which broke after 150-200 hours of use, and Im confident the dyneema will handle constant movement and bending far better than steel. The cable holder - silicone strap vs rubber o-ring: The pro version has a plastic cable holder with a silicone strap to buckle the cable in. On the standard version, they give you a rubber o-ring, which you wrap around your cable, and attach to a tiny metal clip with sharp edges. The metal clip wears into the o-rings and causes them to break. On the pro version, the silicone strap is far thicker than the o-ring, and is held straight by the plastic buckle, so it cannot twist or wear down. The wall attachment is identical to the standard version, which is fine. It worked well for me in the past, and I dont mind that nothing changed. Though the standard version also used the metal clips and o-ring to attach to the wall. The pro version has a silicone loop built into the reels, which again, is much better because the o-rings can break. The overall construction is also much nicer. The reel is a custom plastic mold for the brand with a higher quality plastic, as opposed to the standard version, which looks and feels like a generic part, made with cheap materials. The higher quality materials do make the pro version quieter than the standard version, but I would not call it silent. There is still the sound of the the reel (think of how a retractable badge, or key holder sounds). I look forward to using the pro version of this product for a long time, and I would recommend anyone considering the standard version to upgrade. The standard version will work ok, but it will wear down after a while.

This product is exactly what you need to keep the VR cables up and away from your play space.

Cant stand it. Cable twisted and pretzels above my head within minutes. Rough tug on the headset if I move anywhere. Sent a photo of my configuration to kiwi, and they couldnt find anything wrong with it. Id rather trip over the wire on the floor than ever use this system again.

These kiwi cables helps me manage the long VR cable that I have for my HP Reverb G2, and honestly with out these cables I would probably be tangled very often while attempting to use my VR headset. My main gripe with the product is its sticking pads; when attempting to take these pads off your ceiling, proceed with caution, since the pads themselves will strip any pain they touch.

Works great, takes sometime to find the right tension points. I wish it was easier to reset from standing to seated play without too much overhang. Trial and error depending on your playspace. I go from seated to laying on a couch so I either have to much slack when standing or too much tension pulling when laying down that I have to adjust manually between playstyles.

Ultra quiet easy to use. The only thing I would have wish it included was an ability to increase or decrease how strong the cable retraction was. Other than that it is perfect. Yes I know you can increase the length of the cable extension. But I feel it would have been easier to just increase or decrease the tension on the spring.

I’m impressed. One month later and they are working perfectly. They still stick strong to the ceiling without any signs of deteriorating. I could not imaging playing VR without these things. I hope in the next version you make the Pulley systems tension adjustable or at least offer an option to purchase a looser one or even just add some optional weights like fishing sinkers to attach? It’s fine how it is, but it could be better just to have a bit less tension. Saying as a suggestion for the future. Not to detract. These are freaking amazing.

I previously was using another cable management system that was slightly cheaper, which did the job fine but had higher tension and twisted metal cables. Finally, one of the cables snapped and rendered the pulley useless and I was forced to buy another set. After ordering these, I replaced my older set with the KIWI versions and havent looked back. Not only are these sturdier, but are set up just to work for cable management. Other pulley systems are set up as bundles of ID card pulleys, but these actually are designed to hold cables thanks to the cable holders at the ends. In addition, the tension and pulling force is just correct: not too much but not too weak. Are these more than the others? Yes, but the extra price you pay is worth the premium.

These pulleys run smoothly, are quiet, and seem to be built quite well. My medium sized complaint is that, due to the fact you cannot adjust the tension lower, the link to the headset tugs a bit too much. Im sure in a higher ceiling room with more cable to hang down itd work fine, but Id rather a few low tension ones be included in the box (or make the tension adjustable). Ive moderately fixed this problem by attaching a small weight to the last link, but this only works when pulling the headset downward. Tip for those reading: If you loop a rubber band around your VR cable, and a magnetic detachable keychain, you can easily detach and reattach your cable to these pulleys. Picture attached.

Perfect. Package provided multiple options for mounting. Quality might be too good. I feel spoiled. Thank you. I highly recommend for any VR user or for suspending any cables. It can handle about 5-10 spins before it gets caught up, which is far better than without ceiling suspension.