[Pro Version] KIWI design VR Cable Management, 6 Packs VR Pulley System fits Quest/Rift S/Valve Index/HTC Vive/Vive Pro/HP Reverb G2/PSVR/PS VR2 VR Accessories, Compatible with Quest 2 Link Cable

This pulley system was an affordable way to get the 16’ USB cable out of the way when playing VR. I’ve had the system for ~6 months and it’s held up well to my 12yr son’s Gorilla Tag and other, active VR games as he moves all over his room without any worry about yanking the cord out of the computer or the headset. Simple installation. You just twist a few screws into your ceiling to guide the wire and you’re done.

I run the Vale Index, and I have a good size play area, with a padded floor. The wire for the valve is heavy, and, well, I can be a bit crazy with my movement. I box on thrill of the fight, and I engage Onward Daily, and aggressively. This means, I move, and need to move. These devices make that easy. I mean easy. They have sticky hooks, that stay on tight, with not one coming off in more than a month now of daily use. But, when I go to move them, they come off easy enough, and still...Yes...Still, stick right back on in the new location. I have moved them three times. I know...I know...unbelievable. But its true. Now, I started with a square pattern to hold my wires. Yes, I get it now, not the right pattern. A straight line is perhaps best, so, I got wise, and set them up better. World of difference. I will get another set soon, and improve, though the improvement is not needed. One set was enough, and I am glad I got this product right away. Price, forgetaboutit! Its perfect. No reason to not get your wires organized and I do not see a reason to shop around for other options, this works great. Thank you for the care.

This cable management solution is the best that you can get without paying a lot for wireless adapters. I have had a fantastic time using this and can spin 360 degrees with no cables getting in my way! It is very easy to set up and is well worth the low price. It comes with screws and adhesives. I chose to use the adhesives on my wood ceiling and it sticks perfectly and is very quick to set up.

Right out of the box I stretched out a pulley to test how silent it was. The claim of silence seems to mostly be based on the rubber that deadens the retraction click and this works well enough to be silent within vr even if not outside of it. That said, I immediately doubted the product after stretching it out further. The reason for deducting two stars is due to the tension ramping up as the cord is pulled out. The only adjustment is to change the slack but, without a corresponding adjustment to tension, this feature is nearly pointless. The recommended triangle setup really does work flawlessly for standing play but the pull becomes too noticeable after 1 or 2 steps in any direction. My space measures 3 meters by 3.5 meters according to the steam vr room setup so 1 or 2 steps is not sufficient. I spent a couple hours experimenting and here is what works best for my setup. First off, 6 pulleys is not enough so I ditched the triangle setup. Im very glad that more adhesive hooks were included than needed. I still have 3 points of contact with the ceiling but ended up chaining the pulleys together. 1st point nearest the pc has 1, 2nd point has 2, 3rd point has 3. I found that the easiest way to calibrate this was to place the headset into the corner. Each link of the chain could then be inspected and the rubber gripper on the cord adjusted until all pulleys were about the same length. A balance must be struck between ensuring that no pulley is stretched too far yet without the cord dangling low enough to entangle your neck or hands. Overall, this setup is decent but Im probably going to need to order a second kit. There just are not enough points of contact with the ceiling to keep the cord high enough. Ill likely have leftovers but I figure the rest can be spares. This would be a 5 star product if there was a way to adjust tension. This would be a 4 star product if they were more open about the requirements for a full room setup and sold a 10 pack going for about 1.5 the cost.

This is an excellent thing to purchase if you have a VR kit of any sort and dont fancy the idea of tripping over the cable that they typically come with - itll keep it over your head so you can do whatever without tripping over the cable. 10/10, hope I dont have to buy again - but if these break I know where to get em.

Keeps my cable off the floor and helps with mobility. One of the sticky pads came off the ceiling early on but I pressed it back on harder on a slightly flatter spot and so far all of them have stayed up for several months. If I had a more permanent VR space I would drill them in but these sticky pads are good enough for now.

This functions great as a product to keep cable weight off ones self, but if you are a more ambitious VR enthusiast these are recommended with caution. I have a standard ceiling and I had a handstand go wrong with my foot getting caught in the line. All would have been fine but the length of the system does not reach the floor and caused a mishap with landing. The cable management broke and I have a damaged foot. Also the pull of the cables is on the weaker side and I would recommend about 9 if you want a taut system.

A great product for the price

These kiwi cables helps me manage the long VR cable that I have for my HP Reverb G2, and honestly with out these cables I would probably be tangled very often while attempting to use my VR headset. My main gripe with the product is its sticking pads; when attempting to take these pads off your ceiling, proceed with caution, since the pads themselves will strip any pain they touch.

I think Ive said this about all the Kiwi products Ive purchased.. GAME CHANGER. Silent operation, At least 7 feet of pull with minimal resistance until you get to the last 2 feet. You know when youre about to run out of slack, but it doesnt interfere with the game. I can tell these people have played a lot of VR and know what is needed.