Thermalright Intel 12th/13th Generation LGA1700 Anti-Bending Buckle,CPU Stress Bending Correction Fixer, Curved Pressure Plate,Fully Fitted and Fixed Without Trace Installation (Black)
-
Justin
> 3 dayI used this on an Intel Core i7-13700K with an ARCTIC Liquid Freezer II 420 for cooling. With the stock frame a few of the cores kept spiking over 100C under load, forcing them to thermally throttle. Since the same cores were overheating every time, it seemed like the CPU wasnt properly mating with the cooler, which is exactly what this product is designed to fix.
-
Tim
> 3 dayRather easy to install, I removed the motherboard from the case, and removed all my RAM. It might be doable without taking the motherboard out of the case but I didnt want to try it.
-
Elton Reynolds
28-09-2024Work as advertised, easy to install.
-
Constantine
Greater than one weekLook I realize Thermal Grizzly basically thought of these as a solution for the 1700 socket bend but they’re super expensive and hard to find in the States. And yes, there are even some builders that believe these contact frames are just a trend and are nothing more than a security blanket for a nonissue. And in same cases that’s absolutely true. Some CPUs IHS are perfectly fine with the socket bend I had 4 that were completely fine with or without the contact frame. But after 15 builds with extreme socket bend making for poor contact with heatsinks I can say this helps more often than not. This contact frame has lowered temps by upwards of 8C on my builds and yes I tested each one. So yes, in my professional opinion Intel created a problem, never addressed it and these are the best solution, especially for anything Core i7 and up. The fact that Thermal Right created these at such a reasonable price and are indeed just as effective as Thermal Grizzly’s (check Gamers Nexus) seems too good to be true, but as I’ve said I’ve used these on 15 builds and they’re worth every penny.
-
ryan
> 3 dayCombined this plate with a very slight undervolt on my 13700k and now its maxes out around 85C as opposed to thermal throttling before. 100% these plates are essential for keeping new Intel cpu temps under control.
-
Matt F
> 3 dayI was skeptical, but after struggling with my OC 13700K temps despite custom loop I decided to give this a try. No change in ambient, test, or overclock with a 12 degree delta. 12 degrees for a ten minute installation is massive. Cinebench caps at 88 now when I was hitting 100 and throttling previously. 5.7ghz all core and happy.
-
Tristen Sands
> 3 dayBefore installing this contact frame on my i7 13700k, I was getting temps around mid 70’s while playing Escape From Tarkov and Insurgency Sandstorm. I have my cpu undervolted by .1 and overclocked by 100mhz (very mild imo). I’m about 5 hours into gaming after installing, and my MAX cpu package temp so far has been 68C, but average is 60C!!! That is a huge improvement from before. Very glad I spend the 12 bucks!
-
Androsk
> 3 dayfacil instalacion y cumple su funcion
-
José A.
> 3 dayExcellent product.
-
Shelley
Greater than one weekPurchased this for my first Intel build ever. I installed this after using the stock bracket and seeing some relatively high temps. A quick search of Reddit brought up many recommendations for this, so I picked one up. It’s reduced the max temp on my 13700k from around 90c to about 85c with my EK Nucleus 360mm AIO. Definitely worth the cost IMO, even came with free thermal paste. I didn’t use the paste, but it’s a nice touch for sure.