Thermalright Intel 12th/13th Generation LGA1700 Anti-Bending Buckle,CPU Stress Bending Correction Fixer, Curved Pressure Plate,Fully Fitted and Fixed Without Trace Installation (Black)
-
Amazed
> 3 dayMultiple cores of my i9-12900KS CPU always peaked at 100 degC during Cinebench R23 multi-core tests conducted at 21 degC ambient. I tried several thermal paste application methods/patterns, ...but following AIO pump assembly removal, the paste residue pattern was always evenly distributed with no evidence of CPU IHS cover bending/warping from the motherboards standard LGA1700 CPU mounting solution.
-
SkoryJ
> 3 dayI didn’t notice a change to my thermals, but it makes my install look cleaner
-
José A.
> 3 dayExcellent product.
-
Eric Ward
> 3 dayInstalled this on my Asus Maximus Z790 Hero with no problems. Used factory screws from motherboard and no issues. Make sure to tighten in criss cross pattern to make sure it tightens evenly and doesn’t bend. Highly recommend as this also lowered my CPU temps on my 13900k
-
Cjo-91
Greater than one weekAs per gamers nexus and jays two cents, this provided a better pressure distribution on my cpu. Low profile and more reliable than the stock bracket
-
William McKay
> 3 dayDropped an average of 15C after I replaced the stock CPU bracket on my Gigabyte Aorus Elite AX. This fit very snug and secure on the 13th Gen i9 and I couldnt be happier!
-
Soheyb Weilenman
28-09-2024Was skeptical at first even after watching all the videos online about this but it really worked, dropped my temps by about 5-7 degrees on both my 12th and 13th Gen CPU’s. Recommending this to all my friends!
-
Warren Nel
> 3 dayHello all. This is really a great product and works very well. Ive overclocked my 13600k to 5.5GHZ all cores and I never go over 50c while gaming I would really recommend it for you
-
Aurelio M
> 3 dayWhen I bought my i7-13700K, the CPU would randomly spike to 100 °C while idle and stay at that temperature for 4 to 5 minutes. I upgraded my CPU cooler to a corsair 420 mm CPU watercooler, but the same issue occurred, although it didnt stay as long at 100 °C. The problem disappeared when I switched to the Thermalright contact frame. I also noticed an improvement in the average temperature of the CPU at idle and under load. It is clear that this contact frame helps the CPU behave in a better way, especially for a CPU that is known to overheat.
-
Shelley
Greater than one weekPurchased this for my first Intel build ever. I installed this after using the stock bracket and seeing some relatively high temps. A quick search of Reddit brought up many recommendations for this, so I picked one up. It’s reduced the max temp on my 13700k from around 90c to about 85c with my EK Nucleus 360mm AIO. Definitely worth the cost IMO, even came with free thermal paste. I didn’t use the paste, but it’s a nice touch for sure.