Noctua NH-C14S, Premium CPU Cooler with NF-A14 PWM 140mm Fan (Brown)
-
Glen C
Greater than one weekThis product was the largest CPU cooler that would fit in my case. The dinky 92mm cooler tower that the prebuilt came with would ramp up to 4400rpms to keep the 12700k from cooking itself. The noise was very unpleasant from the recliner 12 feet away. Now that the noise is almost undetectable when the C14s ramps up the fan. Its a pretty cooler also if you mount the fan under the heatsink. 10/10
-
Vincenzo Eichmann
> 3 day送風ファン14cmを冷却フィンの上、マザーボード側では無く商品画像の様に外側
-
Brent Kimball
> 3 dayWhats to say.
-
Brian
27-09-2024As usual, Noctua makes another great product. They clearly has the easiest installation of any cpu cooler manufacturer out there, I wish other companies would copy them. I’ll recommend any noctua cooler just based on ease of installation alone.
-
Robert E. Jr.
> 3 dayUpgraded my firewall appliance to an i7-4770K to make full use of the throughput provided by my new 500/500 Mbps internet connection. Running Prime95 or AIDA64s System Stability Test saw temps that were alarmingly high so I replaced the cooler I had on the outgoing CPU (an i5-4570T) with this and like every other system of mine that has been graced by a Noctua cooler the temps came right down to comfortable values.
-
Keith
> 3 dayBought this for my NCASE M1 and this cooler delivered. Silent and performs more or less like Noctuas tower coolers like U12s and U12a. Definitely performed better than my old U9S from Noctua as well
-
moodapiller
23-09-2024much smaller than most 140 mm heat sinks. its foot print is amazingly low. despite being slightly more compact and substantially smaller footprint. it performs much better than coolers that are far larger and interfere more
-
Don
Greater than one weekSolid Cooler for more low profie builds. Cool and quiet low maintenance proposition compared to liquids coolers. As I swtich to this cooler after my H80i losing liquid over time due to evaporation.
-
Greater than one week
I am using this on a 2700X CPU and a Tomahawk B450 Board and right now it is running at 105 degrees F ... It is quiet but then again I am not a gamer but it seems to do the job ... even when my CPU is maxed out I have only seen the temp. in the 120 Degree area, wish I could say the same for my GPU ... but it is a older one, to be replaced soon... If you have a M/ATX case it wont fit, I can tell you from experience ... one way it gets interfered with by the Blue Ray Drive and the other way by the rear fan... it is a big unit ... I see people complain about the colors of the fan, if that is the case order a 140MM that you like but I really like a quietness and I have maxed it out.... You can mount the fan on the top or on the bottom and yes it clears the memory .... Hope this helps guide your decisions ... I am really beginning to think on these reviews that some people just like to downgrade everything ... I am happy with everything in my system
-
Jason
> 3 dayGood thermals, quick install, and it fits my CoolerMaster NR200 just right.
Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-C14S is a premium quality top-flow solution for the highest demands.
|
|
|
|
|
|---|---|---|---|
Low Profile ModeRun with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases. |
High Clearance ModeRun with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height. |
NF-A14 140mm premium fanFeaturing sophisticated aerodynamic optimisations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market. Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14. |
NT-H1 thermal compoundNoctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds. |
C-Type top-flow design
The c-type top-flow design of the NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today"s 140mm tower-style coolers but also ensures excellent airflow over RAM modules and near-socket motherboard components.
Measurements
- Height (without fan): 115 mm
- Width (without fan): 140 mm
- Depth (without fan): 163 mm
- Height (with fan): 115/142 mm
- Width (with fan): 140 mm
- Depth (with fan): 163 mm
- Weight (without fan): 820 g
- Weight (with fan/s): 1015 g
Material
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 1x NF-A14 PWM premium fan
- Low-Noise Adaptor (L.N.A.)
- Fan clips for second fan
- NT-H1 high-grade thermal compound
- SecuFirm2 Mounting Kit
- Noctua Metal Case-Badge
Socket compatibility
Intel LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, LGA2066, LGA2011-0, LGA2011-3 (Square ILM) & AMD AM4, AM5
