Noctua NH-C14S, Premium CPU Cooler with NF-A14 PWM 140mm Fan (Brown)
-
Scotty
> 24 hourIm using this with the fan under the heatsink blowing down onto the motherboard. My V750 SFX PSU is mounted to the front for neater cable management and cooler clearance. Im using Corsair CMK16GX4M2Z3200C16 memory. Plenty of memory and motherboard clearance. I scavenged a NF-A15 off my old NH-U14S cooler as a push fan. Running SOTTR benchmark 3 times on ULTRA settings, the CPU temp was no more than 57C with an ambient 22C (CPU fans set to silent in BIOS). Im still finalizing the build and will likely replace the NF-A15 with a NF-A14 PWM fan, since the A15 has half the air flow as the A14.
-
SCrashNeT
> 24 hourEs extraordinaria la calidad de esta marca, y me llevé la sorpresa que era compatible como lga1700 aunque la descripcción no lo menciobaba...
-
KcMsterpce
> 24 hourI was a slightly concerned about this fitting with the fan on the TOP of the cooler and still being able to fit in my Hyte Revolt 3 case. It turns out that it fits perfectly. To the millimeter.
-
Ben
> 24 hourWarning of the height (158mm if you install fan on top)
-
Peter Stevens
> 24 hourFitted well in the cooler master NR200P case, although my current setup is a 65TDP chip, the cooler keeps it below 60 degrees when fully loaded with Prime95.
-
Layla Bartell
> 24 hourI purchased a Z370 motherboard and installed an I5 8400 CPU and intended on using the stock cooler, since the chip obviously wasnt going to be overclocked, and runs pretty cool compared to the Sandy Bridge CPU it replaced. That was last November.
-
John S. Kjellman
> 24 hourCools my i7-4790K better than the stock cooler. After installing this cooler my CPU temperatures actually dropped several degrees which is great. I do not overclock my system but feel confident that if I needed to this cooler could handle it.
-
NyMazTek315
> 24 hourUsing this air cooler for a AMD 5900x and Asus ROG B450-F. It was super easy to install and works great.
-
Cody Barnett
> 24 hourPictures dont do it justice. This is a big cooler. Albeit the thing still fits. Great cooling.
-
Paxton McGlynn
> 24 hourThis company is simply amazing, great products with wonderful support. Im happy I chose their fans for building my small form factor PC
Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-C14S is a premium quality top-flow solution for the highest demands.
|
|
|
|
|
|---|---|---|---|
Low Profile ModeRun with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases. |
High Clearance ModeRun with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height. |
NF-A14 140mm premium fanFeaturing sophisticated aerodynamic optimisations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market. Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14. |
NT-H1 thermal compoundNoctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds. |
C-Type top-flow design
The c-type top-flow design of the NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today"s 140mm tower-style coolers but also ensures excellent airflow over RAM modules and near-socket motherboard components.
Measurements
- Height (without fan): 115 mm
- Width (without fan): 140 mm
- Depth (without fan): 163 mm
- Height (with fan): 115/142 mm
- Width (with fan): 140 mm
- Depth (with fan): 163 mm
- Weight (without fan): 820 g
- Weight (with fan/s): 1015 g
Material
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 1x NF-A14 PWM premium fan
- Low-Noise Adaptor (L.N.A.)
- Fan clips for second fan
- NT-H1 high-grade thermal compound
- SecuFirm2 Mounting Kit
- Noctua Metal Case-Badge
Socket compatibility
Intel LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, LGA2066, LGA2011-0, LGA2011-3 (Square ILM) & AMD AM4, AM5
