Creality Capricorn Bowden Tubing 1M, Bowden PTFE Tube for 1.75mm Filament with Teflon Tube Cutter, 2X PC4-M6 Extruder Fitting & 2X PC4-M10 Hotend Fitting for Ender 3 V2/3/3 Pro/5/CR-10/10S 3D Printer

See the headline, I am not able to use the item at this time.

I purchased and received the replacement tubing. I have an ender 3v2. One of the biggest problems with it is the potential for a piece of PLA to break and get jammed. I had this happen on a 6 month old printer. I have an older model (ender 3v2) and I just took the tube assembly off it and replaced the one that was jammed. It has worked fine for several months but the tube started to come out of the joint…..so I replaced the joint (metal piece that screws into feeder). However a piece of PLA broke off in the tube and I had to replace. The boden tube had to be cut and the included cutter worked well. I just lined it up with the old one and cut a similar length. Do not try to use the old joints (metal pieces), as it seems they are one time use pieces. The boden tube comes with 2 sets of metal joints (each set has a hot end and feed attachment). The pieces that come with this set are far superior to the OEM metal pieces and they do not require the small blue clips. The The tubing has to be released from the hot end which required me to take the black cover off, the. Remove the tube from the hot end. The new tube (that I previously cut), fit nicely into both sides with the new metal joints. And I used 2 zip ties to hold the tube to the wiring harness that goes to the hot end. After installation, the first filament that I fed in seems to feed much easier than before. And the spool was a white that I had trouble printing before, and it printed great the first time. I will continue to use, but it seems like my replacement would also serve as a nice upgrade as well.

Everything that came in this package is better quality than the stock equipment. I would definitely have a few of these around if your printing often

Has to replace the nozzle on my printer and wanted to replace the Bowden tube while I was at it. ( During the process also calibrated my E-steps). Just lines up the old tube to the new roll, used the supplied cutter which cut straight and easy. Swapped the fitting on the hot end and fed the new Bowden tube in while the nozzle was 1 turn out. Tightened the nozzle and off we go! Feeding any filament through this is so much smoother. The inner diameter is a closer tolerance to the filaments I use as well as it is very slippery. Feeding filament by hand through this tube is almost effortless. For the money, this has to be one of the cheapest and best bang-for-the-buck upgrades to my printer next to bed levelling springs. I even have enough left over to do my friends printer, with some left over. If I need this again for whatever reason, I will get it again.

Come fast and was what I needed.

Very good replacement parts. Tubing cutter was an excellent touch.

I thought Id bite the bullet and pay an extra few dollars for a product that had really good reviews. Im really glad I did. Im printing a lot of ePA-CF and needed something that will withstand the abrasive carbon. This stuff feels heavier and much more dense than regular OEM PTFE tubes. Its also stiffer, which isnt a concern. Just holding it in your hand you can tell a difference. I converted my Kobra Max to direct drive and installed this at the same time. Im really glad i did. Now I dont have to worry about melted OEM tubes in my heatbreak.

I recently purchased the Creality Capricorn Bowden Tubing kit for my Ender 3 V2, and I must say, it has greatly improved my printing experience. This kit came with everything advertised. First and foremost, the quality of the tubing itself is outstanding. The Capricorn tubing is well-known for its low friction and high-temperature resistance, which results in smoother filament feeding and improved print quality which i personally have experiencedand embraced. I do notice a significant reduction in filament drag and less clogging issues after replacing the stock tubing with the Capricorn tube. The included Teflon tube cutter is a handy tool that will give you clean straight cuts if used properly. It made the installation process a breeze and saved me from the hassle of using other tools hoping the cut was clean enough. The PC4-M6 extruder fittings and PC4-M10 hotend fittings provided in the kit are of good quality and fit perfectly with my Ender 3 V2 printer. They securely hold the Bowden tubing in place better than some other brands that ive previously used. Im giving this product a 4-star rating because while it significantly improved my printing experience, I did encounter a slight issue with the length of the Bowden tube. In my case, 1 meter was just enough, but it would have been great if the kit included a longer tube for those who need it. Overall, the Capricorn Tubing is a worthwhile low cost investment for anyone looking to upgrade their 3D printers reliability and performance.

Great product and fast delivery

Very easy to install and works really good.