ARCTIC MX-4 (incl. Spatula, 4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive
-
Chuy Alberto Reyes Ceron
Greater than one weekLa pasta es buena, la puse en mi PS4 y ahora ya no suena como un avión.
-
Alexitalodance
> 3 dayTutto come da descrizione, grazie.
-
Jason T.
> 3 dayI ran out of my previous tube of MX-4 and had recently bought 4 untested consoles from a pawn shop due to the consoles sitting in the storage shed of the shop I knew a complete tear down would be required to clean them out.
-
Andrew
> 3 dayI was looking for some thermal paste to use on my single board computer. This thermal paste dropped temps on my computers by 5-10 degrees under load. Great product and will be ordering more in the future.
-
jim
> 3 dayused on 5600x and 212 hyper evo temps at 79c after burn in overclocked to 4850mhz stable underclocked 30 ticks, 6 c cooler vs stock settings
-
Gary Graham
> 3 dayHad never heard of this brand before so did a search on YouTube and got a lot of good reviews about it so since I was getting ready to install a new quad-core CPU and cooler I decided to give it a try.
-
Craig F.
> 3 dayI have an existing desktop computer that I moved to an enclosed area below a desk. I have the unit on 24/7 and use a cabinet fan to exhaust the open-only-at-one-end enclosure. As a precaution, I started checking live temps with CPUID HWMonitor and saw occasional spikes at the upper limit of the CPU. An exam inside the cabinet turned up a significantly dusty CPU heatsink and the process of removing it for cleaning revealed a dry thermal paste layer on the CPU side. I put the cleaned heatsink back and that produced some relief, but additional research suggested I needed to re-apply some fresh thermal paste. This is the product I decided to try as a newby paster, based on its non-metallic properties and clear web-site instruction video as well as (FWIW) favorable reviews. Under the same conditions I measured with the cleaned heatsink/old paste, the MX-4 2019 edition kept the peak temps about 10C cooler yet. Not a gamer system and not a lab test, but Im happy with the results.
-
Claudio
> 3 dayNon sono un grande esperto, ma applicata sulla PS4 sembra fare il suo dovere, vedrò sul lungo termine.
-
aisha brittain
> 3 dayWorks great!
-
Caylin Rodrick
> 3 dayLoved it
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
