ARCTIC MX-4 (incl. Spatula, 4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive
-
Edwin
> 3 dayExcellent product! It is bigger than other regular thermal compound and definitely do what it is suppose to do. I applied small amount of ARTIC MX-4 thermal compound on top of the processor and it keep the temperature down. I recommended. It is a must have for any system builder
-
Dan Ragon
Greater than one weekGreat amount of product. Easy to use
-
Phan Dinh Thuy
> 3 day数年間使っていないPCを起動すると、青画面になってしまう。
-
Joe
> 3 dayBeen using arctic paste for decades. Great temps and a reasonable price. Isnt much more to say. Used this for 3 builds and theres still some left over.
-
Jonathan Jahir González Martínez
> 3 dayGenial
-
D
> 3 dayWorked great
-
William G Zinn
> 3 dayDoes what it is intended for , a little bit of goop but all in all great buy
-
Guadalupe Gutkowski
> 3 dayI was having overheating issue with my 3 years old MSI GS70 6QE gaming laptop. After using aida64 extreme, I found out that my laptop is even throttling during the boot-up. When I stress tested my CPUs, I was hitting 40% thermal throttled. So i took matters in my own hands. I ordered this Arctic thermal paste, reapplied to the CPU and GPU heatsink and the results were AMAZING. Before, I was having more than 10 degree C temperatures difference between the cores, even after thermal throttling, temps goes up to 87 C. After i changed the paste, not only the core temperatures are 2-3 degrees apart, but the temperature also dropped about 15 C. Remember, this is without thermal throttling!!
-
Mark S
> 3 dayWorked as expected
-
JK
> 3 dayGood
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
