ARCTIC MX-4 (incl. Spatula, 4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive
-
Nathan
> 3 dayThe thermal paste is fine, it does its job. Its definitely enough for a normal-sized CPU, however, DONT try to use the spreader that comes with it. I actually only got it with a spreader because it shipped faster. I used the spreader despite advice I saw online and it was very messy and got everywhere, plus it likely trapped air bubbles inside the paste itself.
-
spinach
> 3 dayworked great for my pc. it tastes good too
-
Paul
> 3 dayExelente producto 10/10
-
Drew
Greater than one weekI mean it’s the best thermal paste I’ve used but it is quite liquidy but whatever.
-
YuZhe Chen
> 3 dayDropped GPU stress test temp by 4 Celsius, 4 grams for $10, great deal. Lovely paste.
-
Totti
> 3 dayI used this on my new cpu I got. So far, it has done a wonderful job.
-
POedic
> 3 dayI really liked this thermal paste. It goes on great and keeps my Laptop and PC chips from over heating. Better than the Arctic silver I previously was using.
-
Sonny
> 3 dayGreat paste, great on pasta, toast, even cpu.
-
Ben.Dover;)
> 3 daySeriously, my pc was running hot! After nearly stripping three screws opening it up, applying was simple. Even a simple operation would run it hot. So after blowing some canned air, then applying the paste, my pc is much quieter.
-
snayder
> 3 dayBuen compra
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
