ARCTIC MX-4 (4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive, Non-capacitive
-
Fuchs
> 3 dayWurde mir speziell für Spielkonsole empfohlen
-
H. S. Bhambra
Greater than one weekGot to replace GPU paste which was almost 8 years old and straight away go about 10deg lowering in temps
-
Tom Dabu / Forged Garage
28-09-2024Magic!!!! It dropped my cpu temps about 15F by replacing my old silver 5 i put 5 years ago.
-
Joseph X
> 3 dayIt does the job, I mean its a decent thermal paste, just a bit pricey.
-
Florian M
23-09-2024Jutilisais avant de la thermal grizzly qui coute extrêmement cher. Jai pris cette pâte pour son rapport qualité prix et ne suis pas déçu, a voir si la pâte sèche avec le temps mais les performances sont quasi similaire pour le moment
-
Salu
> 3 dayDiese klebrige Masse ist nicht mein Ding. Lässt sich für mich bei Raumtemperatur schlecht verteilen, etwas erwärmt geht es besser.
-
Joerg Kache
> 3 daySehr hohe Wärmeleitfähigkeit und leichte Anwendung. Lässt sich sehr gut auftragen und mit dem Inhalt können einige CPU Lüfter versorgt werden, ist wirklich genug drin.
-
Francesco C
> 3 dayPasta termoconduttrice utilizzata per sostituire vecchia pasta ormai molto secca per un vecchio PC quad-core. Luso del prodotto è elementare. Sufficiente un minimo di manualità.
-
William S. Gentile
> 3 dayI replaced the fan on my processor and used this product to enhance the transfer of heat from the processor. Works fine. Easy to use and creates a good seal. No problems.
-
Eragon17
> 3 dayMit dieser Wärmeleitpaste geht man auf Nummer Sicher und bekommt hohe Qualität zu einem günstigen Preis!
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
Related products
