Acer Nitro 24.5 Full HD 1920 x 1080 PC Gaming Monitor | AMD FreeSync Premium | Up to 250Hz Refresh | 1ms (VRB) | ZeroFrame | ErgoStand | 1 x Display Port 1.2 & 2 x HDMI 2.0 Ports | XFA253Q Zbiipr

Color is awesome, runs smoothly. I use it on my laptop for playing Valorant and it runs much better than my screen. I get 150+ fps and 144-165 hz.

As another reviewer had mentioned, after about 7 to 8 months of use, now the monitor will occasionally just go black. You have to disconnect power, hit the power button to clear the memory, plug it back in and turn it back on. This works about 70% of the time. Other than that, the color accuracy is pretty poor. If youre playing games that have a lot of bright and dark scenes, youll either end up with washed out whites or lose all detail in blacks. This is especially present in games like Tarkov. If you buy this monitor I would suggest changing the gamma to 2.4 as it makes this monitor a little more usable. Overall, if youre playing games that have fairly consistent scene lighting like COD and youre wanting to try out 144hz for cheap, get this monitor. If you can afford something a little more expensive, I would avoid this TN panel and look at the newer 144hz 1ms IPS panels. P.S. The best thing about this monitor is the stand.

There is soooo much ghosting on my monitor but I’m able to just block it out but if you look at the monitor it’s really noticeable

Monitor has a good refresh rate but has issues with G-sync, specifically stuttering; hasnt had issue on other displays, unsure if its due to issues w/ drivers, settings on monitor/PC, etc. Color leaves a lot to be desired.

Worth the buy for the 144hz and G-Sync compatibility it has. Was a great combo with the GTX 1660TI I bought to play games with and NVIDIA announcing G-Sync compatibility to with many other monitors, this being one of them. Picture quality is okay, not the best, but just ok, monitor is very bright, had to lower the brightness so much just to stop it from hurting my eyes. One thing that really annoys me with this monitor, is that it often has problems detecting a video source, the monitor will cycle over and over through the video ports but wont detect anything even if there are things connected. This usually happens when the monitor and or computer goes to sleep. If any of those happen, it will more than likely never pick up the video source again and I have to force shut down the computer to fix it. I have searched online over this issue and it seems to be the monitor and not my GPU. This issue also happens when booting up the computer after the computer has been off(shut down). I have to have the monitor off, turn the computer on, wait to let the computer be in Windows Welcome/Log in screen to finally be able to turn on the monitor safely without having that video source issue. I kinda figured out a trick to know when its ready to turn the monitor back on, and its when my Logitech mouse stops cycling through the RGB colors and is set to 1 color because of the settings i have on it. Once the RGB on the mouse stops cycling, is when I know its at the windows log in screen and its safe to turn on the monitor to avoid the video source cycling issue. This is really annoying to deal with, and am taking a star off because of this. Should be 3 stars because of how annoying it is, but its such a great monitor that Im leaving it with 4 stars. Maybe someone on here has a fix for this issue if others know about it.

My son build a PC and had me buy this monitor. He plays games and does school work etc. would recommend.

UPDATE (Most Recent): Ive had the monitor for about a month now since the last update. The issue was fixed by completely unplugging my tower and monitor and just leaving them over night. Ive learned to avoid the issue by preventing the computer from going to sleep since Ive read that DP has some issues with waking up from sleep mode which is what I think caused my original issue. Occasionally Ill get the No Signal issue again and its usually fixed by just powering down my tower completely and then restarting it. UPDATE (old): Writing this a few days after my original review, my monitor is having issues getting signal over DP. Windows recognizes the monitor but the monitor shows No Signal when I try to turn it on. the HDMI and DVI inputs work perfectly fine but they dont do 144hz, which is what I bought this monitor for. Considering returning or selling this monitor. This is an affordable option for those looking for a 1080p 144 Hz monitor. I use it for both content creation work and just general gaming and its been awesome. Visuals seem crisp, colors are pretty good, and overall Im really happy with it. Out of the box the monitor is EXTREMELY bright. Like you could light a room with just this monitor. I have my brightness set to 0 in the settings and that feels significantly better to look at for long periods of time. As one could expect the built in speakers arent anything great, but Im incredibly pleased that Acer included an audio out port (3.5mm) on the monitor so you can take the audio from the HDMI or DP inputs and send them to your own speakers. The monitor has a button to activate Game Mode which seems to put some sort of sharpen filter on the screen and I have a feeling it plays a little bit with the colors as well. It also puts an FPS counter in the top right corner but that counter was a constant 144, even when I limited my framerate in games to 60 fps just to test it out so the counter isnt too useful and ultimately I think the Game Mode in general is a pain because of that sharpen filter especially. If you switch to Game Mode and then back to regular mode keep in mind that your monitor settings get reverted back to default, this includes color and brightness. Avoid the Game Mode button and this is a non-issue.

Lets start by saying this is a FREESYNC monitor that is G-SYNC ADAPTIVE. It has the software to correctly interact with the NVIDIA control panel when everything is installed properly but it is not a dedicated G-SYNC monitor. Why does that matter? What could be so bad? Who cares? Well if you are streaming and have two monitors or regularly tab out of game during loading screens to a different monitor the G-SYNC adaptive monitor flickers off, goes black, resets and causes Microsoft to try to reconfigure your monitor settings because now you have 1 less monitor to use. Wait the monitor turns back on but G-Sync isnt on anymore... (you dont notice, youre still wondering what just happened and you watched your black screens for 5 or 10 seconds as they figured themselves back out. So you tab back over to the game not getting to do what you tabbed out to do in the first place. When you tab back into the game G-Sync needs to come back on so the monitor flickers out again, your screens goes black, Microsoft loses its mind, you panic because you know the loading screens between games only last 20 to 30 seconds. The game screen comes back on but your frame rate is wrong because of a software issue. You have to go to settings and change the game from full screen mode to windows mode click apply, then back to full screen mode to fix the FPS issue. If your fast you get all of this done just in time to play. If youre not fast, or youre too confused by what just happened you get shot before picking up any weapon in the game and now you get to start this story over.... So if you get this outstanding monitor for the cost and image quality, its the only monitor you will be using and you dont tab out of game: 5 Stars (But dont buy another or well... read above....) If you bought this outstanding monitor but you tab out alot and use more than one monitor you are going to spend a few weeks trying to find the right settings to edit to minimize this gigantic G-Sync Adaptive Flaw. Best of luck.

Everything is great, but you must change the default settings. Having the refresh rate glued to the screen isnt a great default (that has to be overwritten). The super sharpness setting also looked terrible to me, it creates way too many jagged edges and distorts the picture. This was all in game mode (I assume it helps the refresh rate) Past that, once youre set up youre good. I have yet to have an issue past fixing bad default decisions.

When I first heard about this monitor, it was almost too good to be true, an under $200 g-sync compatible, 144hz monitor?! I mean come on who are you kidding? My curiosity got the best of me and I had to check it out. At first glance it seemed pretty good, but after reading other reviews I was skeptical because I feared I was going to regret buying it. People had said that they had monitors with dead pixels and washed out colors, or simply a black/white screen. However, the huge amount of positive reviews just made me want it even more. After receiving this monitor and testing it out, it did not disappoint at all. Initially I had it hooked up to my laptop through HDMI (supports 48-120hz), but I realized that I wasnt using the monitor to its full potential and so I went ahead and purchased a USB type-c to DP cable and viola! I hit that beautiful 144hz and I can tell you this, once you reach 144hz, youre definitely not going to want to drop back down to 60hz. I paired it with my older Acer KG221Q monitor to get a nice dual monitor setup and it looks wonderful. Anyways I have nothing but praises for this monitor. Pros: - 144hz (so smooth!) - 24 this is the ideal size for gaming and even work related tasks - three unique ports for display (HDMIx1, DPx1, DVIx1) - brightness (its literally the brightest screen ever, I think like 316 nits or something) - color accuracy is wonderful (around 96% out of the box, you can see this in the picture I took compared to my older monitor - The ergonomic features is really the cherry on top with the swivel, tilt, and height flexibility Cons: - This may be an issue to some but for me its not that big: pixel density/ppi (pixels-per-inch), the pixel density is as big as I would like it to be, coming in at about 92ppi at 1080p vs the typical 100ppi+ sweetspots at 1080p. It is a 24 so it makes sense that the pixels will be stretched slightly, vs say a 24 1440p 60hz monitor. Again, this isnt a big problem for me as Im not sitting like two inches away from my screen and its not that noticeable when doing normal tasks whether it be gaming, work, etc. [REMEMBER 24 1080p 144hz > 24 1440p 60hz] Side note: make sure you go to settings in order to change the refresh rate to 144hz, otherwise itll most likely be set by default to 60hz out of the box. Also YOU NEED USE THE DISPLAY PORT TO GET FULL 144hz, HDMI will only get you up to 120hz, and thats if you have an HDMI cable that supports that bandwidth.