2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
David
> 24 hourIch habe mir dieses Kabel geholt der Stecker ist schnell abgebrochen also der Verschluss von dem Anschluss ist sehr schnell abgebrochen
-
Frau Stein
> 24 hourWegen eines großen Biltzangebots habe ich ein Kabel gekauft. Es war echt billig und wurde sehr schnell geliefiert. Das Kabel ist lang genug und funtioniert sehr gut. Es gefaellt mir besondes, dass der Stecker nicht locker in der Buchse steckt! Falls man das Kabel herausziehen muss, sind zerbrechliche Plastikteile geschützt. Es hat sich total gelohnt.
-
SANDRA
> 24 hourMy daughters room (upstairs) is the furthest spot from out router (downstairs) and she always receives a weak signal. Before installing the extender, I measured the signal strength in my daughters room (5.2 mb/sec). I installed the extender in our upstairs hallway and then measured again. The signal from the extender into my daughters room is now 35.3 mb/sec. Installation was very simple per the instructions. Very pleased with the results, I really was not expecting this size of an increase.
-
najanaja
> 24 hourDas Kabel hält was es verspricht, war pünktlich da und hält jetzt schon zwei Monate tägliches Ein- und Ausstecken aus...
-
JERRY
> 24 hourGreat to add WiFi via ethernet on a Single Board Computer. Good connectivity and signal strength.
-
Michael G.
> 24 hourIch hab das Kabel im Zimmer fest verlegt zu einem Fernseher. Signal wird ohne Probleme übertragen.
-
PATRICIA
> 24 hourIm still waiting for something to go wrong. But so far everything has worked perfectly. I can now access wifi on my porch without any difficulty mainly with Apple products. Set up couldnt be easier. Just push two buttons. Great product!
-
SANDRA
> 24 hourThis boosted the signal strength of my wireless router. I was very surprised. Im able to get a good signal in my garage now. Wow!
-
Kornel
> 24 hourGood product
-
KEITH
> 24 hourFollow the directions and it will work well. You cant just snag a Wi-Fi signal out of cyber space. You must first sync the Range Extender to a Wi-Fi router which means you have to gain access to the router.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
